Search This Blog

Monday, February 17, 2014

Vertex Edge Graphs PowerPoint Example 1 (click on slides to enlarge)









































5 Methods to Solving Equations with Variables on Both Sides

http://www.wikihow.com/Solve-Equations-with-Variables-on-Both-Sides

NOTE: Compare the problem(s) you are doing; to make sure you are looking at the method you need to use.
 
Method 1
1
Examine the equation. When dealing with an equation that has a single variable on both sides, the objective is to get the variable on one side in order to solve it. Check the occasion to determine the best way to go about doing so.
  • 20 - 4x = 6x   
2 
Isolate the variable to one side. You can isolate the variable by adding or subtracting the variable with its corresponding coefficient to both sides of the equation. You must add or subtract to both sides in order to keep the equation balanced. Choose a variable-coefficient pair already in the equation, and when possible, choose to move a pair that will create a positive value for the coefficient in front of the variable.
  • 20 – 4x + 4x = 6x + 4x
  • 20 = 10x 
3
Simplify both sides through division. When a coefficient remains in front of the variable, remove it by dividing both sides by that coefficient. You must divide both sides by that value in order to keep the equation balanced. Performing this step should isolate the variable, thereby allowing you to solve the equation.
  • 20 / 10 = 10x / 10
  • 2 = x 
4 
Check the equation. Verify that your answer is correct by plugging the value you found for the variable back into the equation, using it to stand in for the variable whenever that variable appeared. If both sides of the equation are equal, congratulations – you solved the equation correctly.
  • 20 – 4(2) = 6(2)
  • 20 – 8 = 12
  • 12 = 12
Method 2
 
1
Examine the equation. When dealing with an equation that has a single variable on both sides, the objective is to get the variable on one side in order to solve it. For some equations, you will need to take additional steps before you can bring the variable over to one side.
  • 5(x + 4) = 6x - 5
2
Distribute as needed. When dealing with an equation that has a parenthetical expression, such as 5(x + 4), you must distribute the value outside of the parentheses to the values inside using multiplication. This is a necessary step to take before proceeding.
  • 5x + (5)4 = 6x – 5
  • 5x + 20 = 6x – 5
3
Isolate the variable to one side. After removing the parentheses from the equation, take the standard steps required to isolate the variable to a single side of the equation. Add or subtract the variable with its corresponding coefficient to both sides of the equation. You must add or subtract to both sides in order to keep the equation balanced. Choose a variable-coefficient pair already in the equation, and when possible, choose to move a pair that will create a positive value for the coefficient in front of the variable.
  • 5x + 20 -5x = 6x – 5 -5x
  • 20 = x – 5

4
Simplify both sides through subtraction or addition. Sometimes, additional numbers will be left on the side of the equation containing the variable. Remove these numerical values by adding or subtracting them to both sides. You must add or subtract the values to both sides in order to maintain a balanced equation.
  • 20 +5' = x – 5 +5
  • 25 = x

5
Check the equation. Double-check your solution by plugging the value back in, using it to stand in for the variable whenever that variable appeared. If both sides of the equation are equal, congratulations – you solved the equation correctly.
  • 5(25 + 4) = 6(25) – 5
  • 125 + 20 = 150 – 5
  • 145 = 145
 Method 3

1
Examine the equation. When dealing with an equation that has a single variable on both sides, the objective is to get the variable on one side in order to solve it. Some equations will require additional steps before the variable can be isolated to one side.
  • -7 + 3x = (7 - x)/2
 
2
Remove any fractions. If a fraction appears on either side of the equation, you should multiply both sides of the equation with the denominator in order to remove the fraction. Perform this action to both sides of the equation to keep it balanced.
  • 2(-7 + 3x) = 2[(7 – x)/2]
  • -14 + 6x = 7 - x
 
3
Isolate the variable to one side. Add or subtract the variable and any corresponding coefficient to both sides of the equation. You must perform the same action both sides of the equation. Choose a variable-coefficient pair already in use, and when possible, choose to move a pair that will create a positive value for the coefficient in front of the variable.
  • -14 + 6x +x = 7 – x +x
  • -14 + 7x = 7
4
Simplify both sides through subtraction or addition. When additional numbers are left on the side of the equation containing the variable, remove these numerical values by adding or subtracting them to both sides. You must add or subtract the values to both sides in order to maintain a balanced equation.
  • -14 + 7x +14 = 7 +14
  • 7x = 21

5
Simplify both sides through division. When a coefficient remains in front of the variable, remove it by dividing both sides by that coefficient. You must divide both sides by the same value. Performing this step should isolate the variable, thereby allowing you to solve the equation.
  • (7x)/(7)= 21/7
  • x = 3
6
Check the equation. Check your work by substituting your solution for the variable in the original equation. If both sides of the equation are equal, congratulations — you've solved the equation.
  • -7 + 3(3) = (7 – (3))/2
  • -7 + 9 = (4)/2
  • 2 = 2
Method 4
 
1
Examine the equation. When you have a single equation with different variables on either side of the equal sign, you will not be able to reach a complete answer. You can solve for either variable, but your solution will contain the other variable.
  • 2x = 10 - 2y
2
Solve for x. Follow the standard procedure you would use when solving a variable. Simplify the equation as needed in order to isolate that variable on one side of the equation, without any additional elements. Note that when solving for x in the below example, expect to see y in your solution.
  • (2x)/2 = (10 – 2y)/2
  • x = 5 - y 
3 
Alternatively, solve for y. Follow the standard procedure you would use when solving a variable. Use addition, subtraction, division, and multiplication as needed to simplify the equation, thereby isolating that variable on one side of the equation without any additional elements. Note that when solving for y in the below example, expect to see x in your solution.
  • 2x - 10 = 10 - 2y -10
  • 2x – 10 = - 2y
  • (2x – 10)/-2 = (- 2y)/-2
  • -4x + 5 = y
Method 5
1
Examine the set of equations. If you have a set or system of equations with different variables on opposite sides of the equal sign, you can solve for both variables. Make sure that one variable is isolated to one side of one of the equations before proceeding.
  • 2x = 20 - 2y
  • y = x - 2
2
Plug the variable equation from one equation into the other. Isolate the variable in one of the equations if it has not already been done. Substitute the value of that variable—which will be in equation form at this point—for the same variable in the other equation. Doing so turns the equation into a single variable equation with a variable on both sides.
  • 2x = 20 - 2(x - 2)

3
Solve for the remaining variable. Follow the usual steps needed in order to isolate the variable and simplify the equation, thereby finding your solution for the variable that remains in the equation.
  • 2x + 2x = 20 - 2x + 4 + 2x
  • 4x = 20 + 4
  • 4x = 24
  • 4x/4 = 24/4
  • x = 6
4
Plug this value into either equation. Once you have the solution for one variable, you should plug that solution into either equation in the system to determine what the value for the second variable is. Generally, it is easiest to do this to the equation in which the second variable is already isolated.
  • y = x – 2
  • y = (6) – 2
5
Solve for the other variable. Do the necessary math to solve for the second variable.
  • y = 4
6
Check your answer. Double-check your answer by plugging both values for both variables into one or both equations where appropriate. If both sides of the equal sign are balanced and equal, then congratulations — you've successfully found the value of both variables.
  • 2(6) = 20 – 2(4)
  • 12 = 20 – 8
  • 12 = 12
Step-by-Step Solving Variables on both sides of the = video



 
 

 

Solving Multi-step Equations

http://www.purplemath.com/modules/solvelin3.htm

Most linear equations require more than one step for their solution. For instance:
  • Solve 7x + 2 = –54
    I need to undo the "times seven" and the "plus two". There is no rule about which "undo" I should do first. However, if I first divide through by 7, I'm going to have fractions. Personally, I prefer to avoid fractions if possible, so I almost always do any plus / minus before any times / divide:
      x = -8
    Then the solution is x = –8. 



Formatting your homework and showing your work in the manner I have done above is, in my experience, fairly universally acceptable. However (warning!), it is also a good idea to clearly rewrite your final answer at the end of each exercise, as shown (in purple) above. Don't expect your grader to take the time to dig through your work and try to figure out what you probably meant your answer to be. Format your work so as to make your meaning clear!
  • Solve –5x – 7 = 108
    • x = -23
    Then the solution is  x = –23.
  • Solve 3x – 9 = 33
    • x = 14
    Then the solution is  x = 14.
  • Solve 5x + 7x = 72
  • First, I need to combine like terms on the left; then I can solve:
      x = 6
    Then the solution is  x = 6.
  • Solve 4x – 6 = 6x
    I need to move all the x's over to one side or the other. To avoid negative coefficients on my variables, I usually move the smaller x; in this case, I'll subtract the 4x over to the other side:
      -3 = x
    Then the solution is x = –3.
In the above exercise, note that it is perfectly okay to have the "x=" be on the right. The variable is not "required" to be on the left; we're just used to seeing it there. It's alright if your solution works out with the variable on the right. However (warning!), I have heard of some instructors who insist that the variable be placed on the left-hand side in the final answer. (No, I'm not making that up.) If you have any doubts about your instructor's formatting preferences, ask now.
  • Solve 8x – 1 = 23 – 4x
    • x = 2
    Then the solution is  x = 2.
  • Solve 5 + 4x – 7 = 4x – 2 – x
    Before I can solve, I need to combine like terms:
      x = 0
    Then the solution is x = 0.
It is perfectly fine for x to have a value of zero. Zero is a valid solution. Do not say that this equation has "no solution"; it does indeed have a solution, that solution being x = 0.
  • Solve 0.2x + 0.9 = 0.3 – 0.1x
  • This equation solves just like all the other linear equations. It just looks worse because of the decimals. But that's easy to fix: however many decimal places I have, I can multiply by "1" followed by that number of zeroes. In this case, I'll multiply through by 10:
      10(0.2x) + 10(0.9) = 10(0.3) – 10(0.1x)
      2x + 9 = 3 – 1x
    Then I solve as usual:
      2x + 1x + 9 – 9 = 3 – 9 – 1x + 1x
      3x = –6

      x = –2
If one of the decimals had had two decimal places, then I'd have multiplied through by 100; for three, I'd have multiplied through by 1000.
  • Solve  (1/4)x + 1 = (1/6)x + 1/2
  • To simplify my computations for equations with fractions, I can first multiply through by the common denominator. For this equation, the common denominator is 12:
      (12/1)(1/4)x + 12(1) = (12/1)(1/6)x + (12/1)(1/2)
                        3x + 12 = 2x + 6
        3
      x – 2x + 12 – 12 = 2x – 2x + 6 – 12
                                  x = –6

Solving One-Step Equations

Rules for Solving 1-Step Equations:


Step 1:  Identify the variable.

          Variable-  the letter in the problem, it’s what you are solving for
à     it can be any letter, NOT JUST X OR Y
 
       For example: 

                   1.  7y  =  49                     à                “Y”  IS THE VARIABLE

                   2.  f - 14 =  24                 à                “f”  IS THE VARIABLE



          You try:  Identify the variable

                   1.  3x  =  36                     à                ___________________

                   2.  n + 11  =  27                à                ___________________

                   3.  25t  =  100                 à                ___________________

Step 2:  Find out what operation that the problem is.
             (x,  ÷,  +, or -)
 
        For example:

          8n =  16                 à                This is multiplication (x)
       z + 10 =  15            à                This is addition (+)
 
 
 
Step 3:  Do the OPPOSITE operation to BOTH sides of the = sign             to solve the problem.  This gets the variable by itself!
 
 
Remember that you have to get the variable by itself to find the answer!!  *

Directions:  Solve each 1-Step Equation by finding the variable.
 
1.      4j =  12
 
Step 1:  Identify the variable.                  à      ___________________
 
Step 2:  What operation is it.                   à      ___________________
 
Step 3:  Do the OPPOSITE operation.       à      ___________________
              (to both sides)
 
Step 4:  Write the answer                        à      ___________________
              (j =  __ )
_______________________________________________________
 
2.     56 – k =  43
 
Step 1:  Identify the variable.                  à      ___________________
 
Step 2:  What operation is it.                   à      ___________________
 
Step 3:  Do the OPPOSITE operation.       à      ___________________
              (to both sides)
 
Step 4:  Write the answer                        à      ___________________
              (k =  __ )


Sunday, February 16, 2014

Solving Two-Step Equations

A two-step equation is as straightforward as it sounds. You will need to perform two steps in order to solve the equation.

One goal in solving an equation is to have only variables on one side of the equal sign and numbers on the other side of the equal sign. The other goal is to have the number in front of the variable equal to one. The variable does not always have to be x. These equations can make use of any letter as a variable.

The strategy for getting the variable by itself with a coefficient of 1 involves using opposite operations. For example, to move something that is added to the other side of the equation, you should subtract. The most important thing to remember in solving a linear equation is that whatever you do to one side of the equation, you MUST do to the other side. So if you subtract a number from one side, you MUST subtract the same value from the other side. You will see how this works in the examples.

In solving two-step equations you will make use of the same techniques used in solving one-step equation only you will perform two operations rather than just one.

Let's Practice:

  1. Solve
This problem does not have the variable by itself on one side. We need to get rid of the 4 that is added, so we’ll need to subtract 4 from both sides. Even after doing that, there is still a 3 multiplied by the variable, so division will be necessary to eliminate it.

  1. Solve
The variable is not by itself on one side. We will get rid of the 5 that is added by subtracting 5 from both sides. This still leaves a -2 in front of the variable so we will have to divide both sides by -2.

  1. Solve
As in the previous example, the variable is not by itself on one side. We will need to get rid of the -5 by adding 5 to both side. We will then need to multiply both sides by the reciprocal of which is .
 http://www.algebralab.org/lessons/lesson.aspx?file=algebra_onevariabletwostep.xml